Contact
Xinxiang New Zuan Diamond Tools Co.,Ltd
Address: 18# Building, Jingu Oriental Plazza,No.1 Jinsui Road, Xinxiang 453000, China
Tel: +8618003823130
Email: 2571759024@qq.com
Web: www.nz-diamondtools.com

Diamond Grinding Wheel Of The Cylindrical Grinding Techniques Are Four

  Diamond grinding wheel of the cylindrical grinding techniques are four, the following were introduced.

  1. Diamond grinding wheel longitudinal grinding method. This method of work efficiency is relatively low, but its quality is relatively good, and similar products compared to roughness is relatively low. In the grinding time, the diamond wheel rotation is very high, no technology is in the rotary motion. Workbench is a composite vertical operation, in each operation process or process in the grinding wheel will have a supply, the excess will be cut off things.

  2. into the grinding skills. Also known as the cross mill method. This is relatively high efficiency compared to the first, and it has the same shortcomings, its grinding force is very large, and the temperature is relatively high, so when grinding must have sufficient cooling liquid The The rotation of the diamond wheel is a driving force, the rotation of the process and the movement of the wheel lead to continuous supply. The grinding wheel table does not have the longitudinal movement of the movement, the width of the diamond wheel and the grinding width will be relatively large, until the grinding to the use of the size so far.

  3. Composite grinding techniques. This is the above two kinds of complex. Composite grinding and grinding method is relatively efficient, relatively high quality; it is better, in other advantages is also a certain advantage. Grinding time, we have to use the workpiece section of the rough grinding, the rest with a disc processing.

  4. The last method is a deep grinding method. Its production efficiency is very high, but the grinding wheel repair techniques are more complex, the overall structural requirements of the workpiece is relatively high, there must be sufficient cut and cut out the length. When grinding is done. A whole section of the wheel will have a stepped shape. The speed and means of the workpiece are very slow. In the grinding of the remaining use of longitudinal grinding.