Xinxiang New Zuan Diamond Tools Co.,Ltd
Address: 18# Building, Jingu Oriental Plazza,No.1 Jinsui Road, Xinxiang 453000, China
Tel: +8618003823130

How To Identify The Quality Of Diamond Saw Blade

  How to identify the quality of diamond saw blade

  First, observe the exposed radish on the head, observe the concentration and distribution. Good diamond saw blade, the content of corundum will not be too little, diamond saw blade but not too much, and evenly dispersed

  Second, look at the welding situation, you can start from two points. First, observe whether the weld is complete and tidy. diamond saw blade If the weld is not continuous and the tip edge is not aligned vertically with the base sink, it will affect chip removal and heat dissipation. And may cause the head to fall off. The second point, the saw blade in his hand, observe the diamond blade and the base in the horizontal plane is aligned, the blade if the uneven, dog staggered, it is likely to cause the use of the plate in the process of collapse, and even head off.

  Again, compare the thickness of the tip and the thickness of the substrate. 350mm granite saw blade, for example, under normal circumstances, diamond saw blade the tip than the base thickness of about 1mm. 350mm marble saw blade tip than the base thickness of 0.2mm-0.5mm or so. The reason for this design is to avoid damage to the substrate and improve the life of the saw blade.

  In addition, the sharpness and wear resistance of the saw blade will have a contradictory relationship. Our advice is that when the blade life to achieve the desired target, and the sharpness is moderate, do not ask to increase life expectancy. diamond saw blade Because the external environment, such as cutting machine, the operation of workers, stone hardness, etc. will change at any time, and once the external environment changes, the original wear-resistant saw blade is not necessarily able to use.